#Quadra 605 Emulator Code To Manage#

By removing the internal floppy drive and fan, and replacing the internal SCSI drive with a SCSI2SD board, I was able to make a design thatвЂ™s about half the size of a standard LC case.Howto configure the Linux kernel / drivers / macintoshEmulation note: For MacOS 7.x, we recommend the Basillisk II emulator. HereвЂ™s a custom laser-cut case for the Macintosh LC family, Performa 400 series, and Quadra 605. July 14th, 2017 Category: Bit Bucket.

All later models should use CONFIG_ADB_PMU instead. This includes many m68k based Macs (Color Classic, Mac TV, Performa 475, Performa 520, Performa 550, Performa 575, Performa 588, Quadra 605, Quadra 630, Quadra/Centris 660AV, and Quadra 840AV), most OldWorld PowerMacs, the first generation iMacs, the Blue&White G3 and the 'Yikes' G4 (PCI Graphics). (on/off) Support for CUDA based Macs and PowerMacsThis provides support for CUDA based Macintosh and Power Macintosh systems. This includes the PowerBook 140, PowerBook 145, PowerBook 150, PowerBook 160, PowerBook 165, PowerBook 165c, PowerBook 170, PowerBook 180, PowerBook, 180c, PowerBook 190cs, PowerBook 520, PowerBook Duo 210, PowerBook Duo 230, PowerBook Duo 250, PowerBook Duo 270c, PowerBook Duo 280 and PowerBook Duo 280c.We want to change this to something like CONFIG_SYSCTRL_CUDA/PMU

(on/off) Support for SMU based PowerMacsThis option adds support for the newer G5 iMacs and PowerMacs based on the 'SMU' system control chip which replaces the old PMU. Say Y to enable support for this device you should do so if your machine is one of those mentioned above. The PMU also controls the ADB (Apple Desktop Bus) which connects to the keyboard and mouse on some machines, as well as the non-volatile RAM and the RTC (real time clock) chip. (on/off) Support for PMU based PowerMacsOn PowerBooks, iBooks, and recent iMacs and Power Macintoshes, the PMU is an embedded microprocessor whose primary function is to control system power, and battery charging on the portable models.

Quadra 605 Emulator Code To Manage

With this code, the backlight will be turned on and off appropriately on power-management and lid-open/lid-closed events also, the PowerBook button device will be enabled so you can change the screen brightness. (on/off) Backlight control for LCD screensSay Y here to build in code to manage the LCD backlight on a Macintosh PowerBook. PCI devices are not fully supported in the bay as I never had one to try withMade a separate option since backlight may end up beeing used on non-powerbook machines (but only on PMU based ones AFAIK)

(on/off) Support for mouse button 2+3 emulationThis provides generic support for emulating the 2nd and 3rd mouse button with keypresses. If you say Y here, make sure to say Y to the corresponding drivers 'Keyboard support' (CONFIG_INPUT_KEYBDEV), Mouse Support (CONFIG_INPUT_MOUSEDEV) and Event interface support' (CONFIG_INPUT_EVDEV) as well. )Say Y here if you want to have ADB (Apple Desktop Bus) HID devices such as keyboards, mice, joysticks, trackpads or graphic tablets handled by the input layer. (on/off) Support for ADB input devices (keyboard, mice. (The Hydra also includes a MESH II SCSI controller, DBDMA controller, VIA chip, OpenPIC controller and two RS422/Geoports.) depends on ADB & PPC_CHRP & !PPC_PMAC64Say Y here to include direct support for the ADB controller in the Hydra chip used on PowerPC Macintoshes of the CHRP type.

depends on I2C & I2C_KEYWEST & PPC_PMAC64This driver provides thermostat and fan control for the desktop G5 machines. (on/off/module) Support for thermal management on PowerMac G5 (on/off/module) Support for thermal mgmnt on laptops with ADT 746x chipsetThis driver provides some thermostat and fan control for the iBook G4, and the ATI based aluminium PowerBooks, allowing slightly better fan behaviour by default, and some manual control. depends on I2C & I2C_KEYWEST & PPC_PMAC & !PPC_PMAC64This driver provides some thermostat and fan control for the desktop G4 'Windtunnel' (on/off/module) Support for thermal management on Windtunnel G4s The emulation is controlled by these sysctl entries: /proc/sys/dev/mac_hid/mouse_button_emulation /proc/sys/dev/mac_hid/mouse_button2_keycode /proc/sys/dev/mac_hid/mouse_button3_keycode If you have an Apple machine with a 1-button mouse, say Y here.

Mac Quadra 605 Emulator